Thermo-insulated atmospheric fermenters

7000,00 €

Our line of 60º thermo-insulated cylindrical-conical atmospheric fermenters, manufactured in AISI304 stainless steel, with double jacket (cone and cylinder) and expanded polyurethane thermo-insulation protected by an AISI304 stainless steel wall.

It differs from the non-thermally insulated model because of the insulation that drastically reduces the temperature losses of the fermenter caused by the heat dissipated during the wort processing.

Thanks to these types of fermenters you will have better energy efficiency, since the tank does not have to continuously contrast the ambient heat in the hottest months or during brewing.

The initial cost is higher than the other model, but it is quickly amortized by saving on electricity.

Our line of 60º thermo-insulated cylindrical-conical atmospheric fermenters, manufactured in AISI304 stainless steel, with double jacket (cone and cylinder) and expanded polyurethane thermo-insulation protected by an AISI304 stainless steel wall.

It differs from the non-thermally insulated model because of the insulation that drastically reduces the temperature losses of the fermenter caused by the heat dissipated during the wort processing.

Thanks to these types of fermenters you will have better energy efficiency, since the tank does not have to continuously contrast the ambient heat in the hottest months or during brewing.

The initial cost is higher than the other model, but it is quickly amortized by saving on electricity.

  • Useful capacity: from 250lt up to 2.000lt

    Dimensions: see comparative data sheet

    Weight: see comparative data sheet

    Working pressure: atmospheric

    Material: stainless steel AISI304

  • Designed according to brewing technology: cylindrical-conical design, AISI304 steel

    High quality finishes

    Interior mirror polished finish 2R BA with roughness less than 0.8 μm

    High energy efficiency

    Ready for use

  • Adjustable AISI304 stainless steel legs with tubular connection

    Nameplate

    Probe holder sleeve

    Double jacket on cone and cylinder (working pressure 3 bar, test pressure 6 bar)

    Expanded polyurethane thermal insulation

    Upper manhole 400mm

    Rising main with 1" Tri-Clamp connection and butterfly valve

    CIP cleaning ball

    Partial and total discharge with butterfly valves TC 1.5".

    Sampling tap

    Pressure relief valve DN50

    Documentation: technical drawings, maintenance and operation manual, certificate of conformity, warranty, etc.

  • DIN32 connections

    Temperature controller with probe and solenoid valve

    Must viewer

    Inline mechanical filter with 1 mm holes

Comparative data sheet of isolated atmospheric fermenters currently in production.